Fan Coils
NEW!
KaDeck
Versatile air conditioning for existing and new-build offices.
Overview
Four installation versions let you install the unit in the centre of the room, on the walls and concealed within the suspended ceiling or discreetly below the ceiling. Optionally, the KaDeck can also be supplied in a colour of your choice.
Hygienically optimized air conditioning is guaranteed for years to come thanks to the internal construction of the KaDeck and its maintenance concept that conforms to VDI 6022.
Thanks to continuously variable EC fans, you can focus on the important matters without disturbing noises and unpleasant draughts. For an interior environment you can feel good in.
The KaDeck‘s designer panel blends discreetly and elegantly into your own person interior design. “Industry standard“ hinges and locking mechanisms ensure the unit‘s long service life.
The KaDeck adapts to your needs, whether in a new or existing building. At only 165 mm high, there is always space for it. Take advantage of our decades of experience in air conditioning.
Make your in-house facilities manager your friend: almost the entire bottom of the unit doubles as a maintenance access panel. Your technician has access to the air inlet filter and inside of the unit in seconds. No further on-site access panels are required.
- Either suitable for 600 x 600 or 625 x 625 mm ceiling grid
- RAL 9016 (traffic white) ceiling panel and frame, customised colour on request
- Ceiling panel can be opened without tools, industrial-quality hinges and closures for an extremely long service life
- Internal cleanable ISO Coarse air filter to protect the internal components from dust
- Rigidity and strength, thanks to galvanised steel frame
- Thermal and acoustic isolation by foamed EPP carcass free of heat bridges
- Organic internal forms for ease of cleaning
- Complete with ceiling panel that can be opened without the need for tools and condensate tray
- No need for additional service hatches
- All components can be accessed once the condensate tray has been removed.
- Easy cleaning of all surfaces along which air flows
- Valve installation (adjustable 2-way or differential pressure-independent) within the housing
- Condensate tray can be removed without tools for cleaning and maintenance
- Made of EPP for thermal and acoustic isolation
- Section that carries condensate consists of an ABS plastic tray resistant to disinfectant
- Gradient on all sides for fast and residue-free condensate drainage from the section through which air flows
- Up to 120 m³/h primary air can be introduced via the KaDeck
- Two nozzles can be connected on each head side
- Easy removal of the EPP closures, insertion of optional 80 mm connection spigots for primary air supply on site
- Primary air is directed through the heat exchanger for temperature control
- Noise-optimised, smooth-running three-wire, continuously variable and energy-saving EC motor
- Tangential roller sitting in CFD aerodynamically optimised EPP/aluminium contour
- Utility model-protected bypass motor cooling to prevent the build-up of heat in heating mode to increase the motor’s service life by 40%
- Unit design and component selection optimised for ease of assembly and operation
- Total unit weight reduced to 60% compared to a steel sheet design, for ceiling installation gentle on the back
- EPP connection areas, with supply/return, primary air labelled
- The electrical connection is easily accessible on one side; all components are pre-wired
- The cables are firmly inserted via pre-assembled PG screw connections and routed in the KaDeck along predefined cable paths
- Includes the following in the wet cooling configuration scope of delivery
- Compact design, without separate float, prevents possible leaks at connections.
- Extremely smooth-running pump, sound pressure level below 20 dB(A), speed and flow rate adapts to the condensate level in the pump sump
- The condensate level is determined by a capacitive sensor, preventing the float switch from sticking
- Maximum delivery height up to 6 m
- Alarm contact in the event of a malfunction or too high a water level in the condensate tray
Downloads
Declarations/Certificates
TÜV Certificate ISO 9001:2008
PDF
(133 kB)
EU Declaration of Conformity KaDeck fan coils (FCU)
PDF
(456 kB)
Cross-product information
Products
PDF
(4.6 MB)
Kampmann hotel references
PDF
(6.2 MB)
Technical catalogues
KaDeck fan coils (FCU)
PDF
(8.5 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
()
Installation manuals
KaDeck fan coils (FCU)
PDF
(7.8 MB)
KaDeck, brief instructions
PDF
(1.8 MB)
CAD-Drawings
Fan Coil KaDeck Zwischendecke, Luftauslass einseitig und zweiseitig, Abmessungen
PDF
(1.7 MB)
Fan Coil KaDeck Zwischendecke, Luftauslass einseitig und zweiseitig, Abmessungen
DWG
(1.6 MB)
Kampmann Today
Induction units vs. fan coils
Due to the low noise emission, both systems are frequently chosen solutions for decentralised hotel air conditioning, but they both reveal in themselves advantages and disadvantages.
Two letters for even more comfort: AF
Ceiling cassettes are a classic for air conditioning office buildings, hotels, exhibition and sales rooms. And Kampmann’s KaCool D has counted among the leading products in this category for a long time now.
Air conditioning hotel rooms properly
The climate in hotel rooms is an ever-occurring reason for complaints by guests – an unavoidable situation. Hotel operators invest a lot of money to provide guests with a comfortable stay.