basic unit

Kampmann TOP C unit heater for heating or cooling for wall mounting. Housing made of sendzimir galvanised sheet steel with standard threaded brackets, complete with motor guard, condensate tray, droplet separator, one-row fin design consisting of plastic profiles with droplet nibs and fitted louvre, two-row, additional discharge and intake components can be screwed on. LABS compliant according to VDMA 24364, category A1/B1/B2/C1/C2-L and B1/C1/C2-W.

Heat exchanger

High-output heat exchanger, consisting of round copper pipes with aluminium fins. Header and manifold made of corrosion-proof steel, suitable for CHW or LPHW.

System		2-pipe
Max. operating pressure	bar	16
Max. entering water temperature	°C	120
Min. entering water temperature	°C	6
Max. air inlet temp.	°C	40
Max. glycol volume	%	50

Condensate drain

Without condensation pump for free condensation drain.

Fan

Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Overtemperature protection of the fan by active temperature management. Integrated motor protection.

Control

KaControl recirculation air module
factory-fitted and wired ready for connection, consisting of:

• Screw-in/plug-in terminals for connection of 24 VDC power supply
• tLAN interface for1 master and 5 slaves broadcast networks
• Slot for optional interface cards:
• RS485 (Modbus, CAN bus, KNX, for integration into BMS or DDC systems)
• Interface parameter programming key
• 2 digital inputs
• Freely parametrisable, e.g. for Day/Night changeover
• Window contact, configured as spring-loaded terminals
• 3 multifunctional inputs parametrisable as:
• Digital input (refer to previous point for functions)
• Analogue input passive for room, return air, coil or changeover sensor
• Active analogue input (0-10 VDC) for external specification of fan speed, configured as spring-loaded terminals
• Screw/plug-in terminals for connection of thermoelectric valve drives, 24 V DC, normally closed
• 1 analogue output 0-10 V DC for fan actuation
• Potentiometer for fan speed limitation
• DIP switch for basic setting of the application.
• Unit shut-down in the event of a fault with message via the control unit
• Uploading of control parameters via a service tool
• Temperature curves can be recorded via server connection
• test process to check inputs and outputs
  
• With an external connection box.

Configuration

Model size		7
Width	mm	900
Height	mm	875
Length	mm	570
Weight	kg	84.5
Water content	l	7.6
Connection		1 1/2''