Basic unit
Kampmann TOP C unit heater for heating or cooling for wall mounting. Housing made of sendzimir galvanised sheet steel with standard threaded brackets, complete with motor guard, condensate tray, droplet separator, one-row fin design consisting of plastic profiles with droplet nibs and fitted louvre, two-row, additional discharge and intake components can be screwed on. LABS compliant according to VDMA 24364, category A1/B1/B2/C1/C2-L and B1/C1/C2-W.
Heat exchanger
High-output heat exchanger, consisting of round copper pipes with aluminium fins. Header and manifold made of corrosion-proof steel, suitable for CHW or LPHW.
| System | | 2-pipe |
| Max. operating pressure | bar | 16 |
| Max. entering water temperature | °C | 120 |
| Min. entering water temperature | °C | 6 |
| Max. air inlet temp. | °C | 40 |
| Max. glycol volume | % | 50 |
Condensate drain
Without condensation pump for free condensation drain.
Fan
Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Overtemperature protection of the fan by active temperature management. Integrated motor protection.
Control
- With an external connection box.
Configuration
| Model size | | 7 |
| Width | mm | 900 |
| Height | mm | 875 |
| Length | mm | 570 |
| Weight | kg | 79.2 |
| Water content | l | 6.2 |
| Connection | | 1 1/2'' |