Basic unit
Kampmann Katherm QK nano trench heater, low height, supplied as a ready-to-install heating trench in the floor, convector-based with tangential fan-assisted convection. Heat outputs tested in accordance with DIN EN 16430, parts 1 and 2.
Floor trench made of sendzimir galvanized sheet steel, painted graphite grey. Height adjustment feet on the side to adjust the trench height, fitted with impact sound insulation, raised floor height adjustment feet with impact noise insulation. With cross struts to reinforce the floor trench. With pre-punched connection openings for water flow and return pipes and electrical connection, room-side. With frame insert profile, colour-coordinated with the grille. Features standard protective installation cover and frame trim. With a cover plate over the connection area.
Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.4,66E+01. Further calculations possible online.
Heat exchanger
High-output heat exchanger made of round copper pipes with aluminium fins including anti-twist mechanism, painted graphite-grey. With air baffle. With integral bleed option.
| System | | 2-pipe |
| Max. operating pressure | bar | 10 |
| Max. entering water temperature | °C | 95 |
| Min. entering water temperature | °C | 15 |
| Max. air inlet temp. | °C | 40 |
Fan
Tangential fan with safety guard. Energy-saving EC fan with 0-10 V signal for continuously variable speed control. All rotating parts are silent and mounted on maintenance-free bearings. Motor monitoring with internal fault processing. Factory-wired.
Control
230 V electromechanical control version
Electrical connection unit factory-fitted and wired. Connection options for on-site signals to control the fan (continuously variable) and actuators, including 230V/ 24V power unit. Continuously variable speed control via an external 0-10 VDC signal.
Motor monitoring with integral shut-down in the event of faults.
Grille
With FineLine grille made from solid triangular profiles with support profiles, rigid construction.
Configuration
| Grille design | | Linear grille |
| Grille finish | | Steel, coated RAL 9006 |
| Length | mm | 2000 |
| Width | mm | 165 |
| Height | mm | 70 |
| Bar height | mm | 4 |
| Bar depth | mm | 2 |
| Bar spacing | mm | 5 |
| Free area, approx. | % | 70 |
| Weight | kg | 13.9 |