Depending on the required air volume and application, the SDA is available in one or two rows of slots.

The slot length can be configured in one piece up to a length of 2000 mm, regardless of the number of slots.

Millimeter-precise gradations allow adaptation to any project.

Depending on the number of slots, the air jet direction can be preset ex works.

The slot nozzles have an air deflection angle of 20° and can be aligned vertically on one side or alternately on the other.

In the double-row version, the air can also be directed completely vertically.

The surface profile consists of an angle profile to rest on the on-site floor and a decorative strip in the nozzle profile.

These profiles are available in a natural anodized or black anodized finish.

• The slotted profile can be installed without tools and can also be removed again to clean the plenum box.
• To do this, it is simply inserted into the neck of the box and placed on the raised floor.
• Seals on both sides ensure an airtight connection between the SDA and plenum box.

• The SDA can be optimally integrated into the architecture as a continuous strip using the connecting plates supplied.

• The front profile of the SDA lies flush with the finished floor.
• The slot is completely accessible and safe to walk on.
• The narrow slot width ensures protection against encroachment.

• The plenum box is equipped with threaded feet for height adjustment and is suitable for use in raised floors.