DAL359

The front panels of the twisters are available in square and round shapes.

The right front is available for installation in plasterboard ceilings, free-hanging or for grid dimensions.

Swirl diffusers can be used for both supply air and extract air, thus maintaining a uniform appearance.

The DAL is available in five nominal sizes from DN 300 - DN 625.

Depending on the required air volume in the room and the ceiling geometry, the hole pattern on the front panels can also be adapted.

• A swirl diffuser can be used to create a classic mixed air system.
• This has the advantage of a simple and quick design and can therefore be implemented cost-effectively.
• The high induction of room air reduces pollutant concentrations and ensures rapid temperature adjustment of the room air.
• The DAL 359 has fixed plastic air guide elements in the front panel.
• These can be adjusted in 2 positions or replaced by blind clips to allow the desired air jet direction.

• Our swirlers can be used as both supply air and exhaust air diffusers.

• The design of diffusers is based on the required air volume in accordance with DIN EN 16798.
• The Kampmann calculation programs can be used to design the diffusers for specific projects.