Unit Heaters
TOP
Article no.:
153000454056FR
List price
2,700.00 €
plus VAT
Overview
This type of heat exchanger is characterised by its low weight and high heat outputs.
- Suitable for LPHW 120 °C and 16 bar continuous operating pressure.
- Aluminium slats permanently connected by pipe expansion.
- Steel header and manifold.
Copper-aluminium heat exchangers are not suitable for use with steam and thermal oil systems.
Steel heat exchangers are recommended if throughout cleaning is required.
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- Highly efficient due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- Optional 2-stage wide-blade fan with explosion-proof AC external rotor motor (IP 44)
- Copper-aluminium heat exchanger (see Fig.), extremely lightweight, with high heat outputs and low dimensions, suitable for low temperature heating systems and LPHW heating systems, steel header and manifold
- Steel heat exchanger, galvanised, robust and durable
- Steel heat exchanger, galvanised steel, cross-counterflow, particularly suitable for high water temperature spreads
- Steel heat exchanger, galvanised, for steam
Ultra-efficient as a component in a hybrid system: while the TOP has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
It is operated for example using a thermostat, KaControl Touch Panel or by linking it into the building automation via Modbus, KNX, or BACnet.
However you plan to heat, TOP unit heaters do the job with the suitable heat exchanger. Copper/aluminium or galvanised steel for PWW/PHW (for low temperature operation as well), cross-counterflow heat exchanger with large temperature spreads, and on request, with a special version for steam.
Accessories
Switching and control units – Mixed air / fresh air, electro-mechanical
Servomotor
can be reversed, 230 V Open/Closed, Protection class IP 54, Type 30262
Suitable for: KaMAX
Suitable for: KaMAX
Article no.:
196000030262
List price
282.00 €
plus VAT
Control accessories
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 1.5 A
Suitable for: Ceiling fan, 1 - 4 units
Suitable for: Ceiling fan, 1 - 4 units
Article no.:
196001530926
List price
223.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 3 A
Suitable for: Ceiling fan, 3 - 8 units
Suitable for: Ceiling fan, 3 - 8 units
Article no.:
196001530927
List price
257.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 5 A
Suitable for: Ceiling fan, 4 - 12 units
Suitable for: Ceiling fan, 4 - 12 units
Article no.:
196001530928
List price
303.00 €
plus VAT
Warm air recirculation controller
including display and two separate temperature sensors, 230 V 50 Hz, Surface-mounted, Protection class II, Protection class IP 54, 4 A
Suitable for: Ceiling fan, 10 Units
Suitable for: Ceiling fan, 10 Units
Article no.:
196001530930
List price
830.00 €
plus VAT
Valve kits
Unit heater shut-off set, angled version
Connection 1'', Type 35976
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035976
List price
244.00 €
plus VAT
Unit heater shut-off set, straight version
Connection 1'', Type 35977
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035977
List price
212.00 €
plus VAT
Valve actuators, supplied loose
valve actuator
Drive T, 230 V AC, 2-point, normally closed, 3m connecting line-AEH, PVC, VA10N, 1 W, Protection class II, Protection class IP 54 Cable length 0.12 m, supplied separately, made of Polyamide
Suitable for: All units with electro-mechanical control configuration in conjunction with 2-way valve or differential pressure-independent valve
Suitable for: All units with electro-mechanical control configuration in conjunction with 2-way valve or differential pressure-independent valve
Article no.:
196TS3P020500AB
List price
65.00 €
plus VAT
Valves
2-way valve kit
as a straight valve body, Connection 1'', kvs value 3.3 m³/h, Type 31911
Suitable for: all unit heaters
Suitable for: all unit heaters
Article no.:
153000031911
List price
97.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, Connection 1'', kvs value 3.1 m³/h, Type 31950
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Min. Flow volume 250 l/h, max. Flow volume 1800 l/h, DN 20
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Min. Flow volume 250 l/h, max. Flow volume 1800 l/h, DN 20
Article no.:
153000031950
List price
187.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, Connection 1'', kvs value 4.1 m³/h, Type 31951
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Min. Flow volume 400 l/h, max. Flow volume 2500 l/h, DN 25
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Min. Flow volume 400 l/h, max. Flow volume 2500 l/h, DN 25
Article no.:
153000031951
List price
290.00 €
plus VAT
Air outlets
calculation-relevant accessory
KaMAX
calculation-relevant accessory
Multi Air MiX for ceiling-mounted units, manual level adjustment
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035111
List price
747.00 €
plus VAT
KaMAX Open-Stop-Close switch
for electrically actuated continuously variable manual adjustment of the KaMAX louvre
Article no.:
196000030115
List price
103.00 €
plus VAT
Louvre
two-row for wall- and ceiling-mounted units
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035002
List price
187.00 €
plus VAT
Induction air outlet louvre
calculation-relevant accessory
mainly used for wall-mounted units, for ceiling-mounted units with ceiling heights of more than 4.0 m
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035101
List price
171.00 €
plus VAT
Diffuser
calculation-relevant accessory
in four directions, for ceiling-mounted units
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035004
List price
261.00 €
plus VAT
Outlet nozzle
calculation-relevant accessory
for ceiling-mounted units, especially for high-ceilinged buildings, sendzimir galvanised
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035006
List price
157.00 €
plus VAT
Wide nozzle
calculation-relevant accessory
recirculating air only, suitable for industrial door air curtains
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035007
List price
254.00 €
plus VAT
Brackets
Universal 2-point brackets
recirculating air only, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030041
List price
101.00 €
plus VAT
Universal 4-point brackets
recirculating air only, made of sendzimir galvanised sheet steel, as a 4-point fixing for ceiling installation, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030042
List price
92.00 €
plus VAT
Universal 2-point T-support brackets
recirculating air only, Ceiling-mounted
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030047
List price
264.00 €
plus VAT
Wall brackets
recirculating air only, made of sendzimir galvanised sheet steel for wall mounting, a complete set
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 5
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 5
Article no.:
198000035044
List price
108.00 €
plus VAT
Ceiling-wall brackets
for ceiling or wall mounting, consisting of 2 multi-edged brackets with slotted holes and screws
price for 1 complete set
Suitable for: Model size 5
price for 1 complete set
Suitable for: Model size 5
Article no.:
198000035049
List price
145.00 €
plus VAT
Galvanised steel components
calculation-relevant accessory
Flexible connection
square
Suitable for: Model size 5, Length 120 - 160 mm
Suitable for: Model size 5, Length 120 - 160 mm
Article no.:
198000035013
List price
154.00 €
plus VAT
Filter box
calculation-relevant accessory
sendzimir galvanised, ISO Coarse 90% (G4) filter
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035010
List price
575.00 €
plus VAT
90-degree air duct
calculation-relevant accessory
Suitable for: Model size 5
Article no.:
198000035021
List price
376.00 €
plus VAT
Air duct
calculation-relevant accessory
square, fixed frame on both sides
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035015
List price
223.00 €
plus VAT
Air duct T-section
Suitable for: Model size 5
Article no.:
198000035022
List price
428.00 €
plus VAT
Ceiling fan
Ceiling fan
free-hanging axial fan, 3-blade,to increase air recirculation and prevent accumulation of hot airfrom the ceiling area, 230 V 50 Hz, robust solid metal design, oscillating suspension, 60 W, Protection class IP 20, 0.35 A, Colour white
Further ceiling fans as supply air fans, see also under Product Selection: TOP without heat exchanger
Suitable for: TOP or TOP C Unit Heaters
Further ceiling fans as supply air fans, see also under Product Selection: TOP without heat exchanger
Suitable for: TOP or TOP C Unit Heaters
Article no.:
153001531421
List price
346.00 €
plus VAT
Downloads
Declarations/Certificates
Certificate ISO 9001, 14001, 50001
PDF
(116 kB)
EU Declaration of Conformity for unit heaters
PDF
(369 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Manuals
KaControl MC - Multi Connect
PDF
(1.3 MB)
TOP unit heaters
PDF
(8.8 MB)
TOP unit heaters, brief instructions
PDF
(4.1 MB)
further product information
Brochure Unit Heaters
PDF
(3.2 MB)
Technical catalogues
KaControl MC - Multi Connect
PDF
(2.2 MB)
TOP unit heaters
PDF
(18.2 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
PDF
(294 kB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
PDF
(342 kB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DWG
(1.4 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DWG
(2.2 MB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DXF
(10.8 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DXF
(17.1 MB)
Installation plans
TOP, electromechanical control version
PDF
(1.1 MB)