Basic unit

Kampmann Katherm QL trench heater, supplied as convector-based ready-to-install trench heaters with supply air connection for displacement air functionality. Heat outputs tested in accordance with DIN EN 16430, parts 1 and 2. Floor trench made of sendzimir galvanized sheet steel, painted graphite grey. Height adjustment feet on the side to adjust the trench height, fitted with impact sound insulation, raised floor height adjustment feet with impact noise insulation. With cross struts to reinforce the floor trench. With pre-punched connection openings for water flow and return pipes and electrical connection, room-side. With frame insert profile, colour-coordinated with the grille. Features standard protective installation cover and frame trim. With a cover plate over the connection area.

Heat exchanger

High-performance convector made from round copper pipes with aluminium fins, coated graphite-grey. With air guide Panel. With integral bleed option.

System		2-pipe
Max. operating pressure	bar	10
Max. entering water temperature	°C	95
Min. entering water temperature	°C	15

Supply air

Supply air spigots for air supply arranged at the side along the length of the duct. Deflector plate to specify the air direction within the displacement air box with integrated slider for air volume regulation. Displacement air outlet plate with integrated eccentrically borne and adjustable air guidance rollers with rectifiers and additional perforations for evenly directed and low-turbulence displacement air discharge into the room. round

Grille

With double T-profile grille. Connections made of corrosion-proof steel springs with matching spacers.

Configuration

Grille design		Roll-up grille
Grille finish		Aluminium, black anodised
Supply air spigot		nominal size 80
Length	mm	700
Width	mm	300
Height	mm	180
Bar height	mm	18
Bar depth	mm	5
Bar spacing	mm	12
Free area, approx.	%	70
Weight	kg	12.3
Connection		1/2 inch
		room-side