basic unit

Kampmann Venkon fan coil for heating and/or cooling. Designed for rooms with high demands in terms of low noise emission and cosy room comfort. Hygiene-certified in line with VDI 6022.
Ceiling unit (also suitable for wall mounting for dry cooling and also for heating). Basic unit made of sendzimir galvanised sheet steel, insulated with a vapour diffusion and noise-reducing layer to prevent the ingress of condensation.

Insulation thickness	mm	3
Air inlet		ISO Coarse filter

Optional primary air connection for the introduction of preconditioned air.
Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.1.73E+02. Further calculations possible online.

Heat exchanger

High-output heat exchanger made of round copper pipes with aluminium fins, including anti-twist mechanism. Integrated air vent option.

System		2-pipe
Max. operating pressure	bar	10
Max. entering water temperature	°C	90
Min. entering water temperature	°C	4
Max. air inlet temp.	°C	40
Max. glycol volume	%	50

Condensate tray

Powder-coated galvanised sheet steel condensate tray. Condensate tray designed as an independent component that can be removed for cleaning and maintenance in accordance with VDI 6022.

Fan

Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Motor fault: automatic motor shut-down in the event of a fault. No fault alarm is possible.
Insulation class F

Protection class IP

34

Control

Electromechanical control version.
Factory-fitted and wired electrical connection unit in the unit with connection options for on-site signals to control the fan speed and actuators.

Configuration

System		2-pipe
Air inlet		bottom
Model size		63
Length	mm	925
Width	mm	494
Height	mm	223
Weight	kg	24.2
Water connections		right
Connection		1/2 inch