Basic unit
Kampmann Venkon XL fan coil for cooling and/or heating. Designed for recirculation air applications with particularly high cooling and external pressure requirements. Designed as a recirculating air version with rectangular duct connection on the intake and discharge side. Hygiene-certified in line with VDI 6022. Sendzimir galvanised sheet steel housing. Wall-mounted unit (also suitable for ceiling mounting)
Filter classFilter ePM10>50% (M5).
Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.1,87E+02. Further calculations possible online.
Heat exchanger
High-efficiency heat exchanger made of round copper tubes with aluminium fins, including anti-torsion device to prevent damage to the coil.
| System | | 2-pipe |
| Max. operating pressure | bar | 10 |
| Max. entering water temperature | °C | 90 |
| Min. entering water temperature | °C | 5 |
| Max. air inlet temp. | °C | 25 |
| Max. glycol volume | % | 50 |
Condensate tray
Condensate tray, galvanised sheet steel, powder-coated and glued on all sides with thick insulation. Condensate tray designed as an independent component that can be removed for cleaning and maintenance in accordance with VDI 6022.
Fan
Double-sided suction radial fan. Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Integrated motor protection. Insulation class F.
Control
KaControl system
factory-fitted and wired ready for connection, consisting of:
- Mains adapter board:
- 230 VAC terminals with fuse
- power supply 24 V DC
- Connection terminals for EC fan and condensate pump
- KaControl PCB:
- Single room control of max. 6 units
- Slot for optional communication cards for integration into KNX TP or Modbus RTU automation networks
- CANbus card for extension up to 30 units
- Modbus card for BMS connection or KaControl system solution
- LON card for BMS connection
- KNX for BMS connection
- Two parametrisable and invertible digital inputs for Unit On/Off, Comfort/Economy, Heating/Cooling (changeover), condensate alarm
- Three multifunction inputs, e.g. for room temperature or air intake sensors.
- One digital output 24 VDC/max. 2A for heating/cooling fan mode (2-pipe) or cooling (4-pipe)
- One digital parametrisable output 24 VDC/max. 2A for heating fan mode (4-pipe), cooling requirement, heat requirement or unit fault message
- Functions:
- room frost protection function
- Frost protection function tab (clip-on sensor needed)
- Motor monitor
- condensate monitor
- Valve and fan activation via water temperature (clip-on sensor needed)
- Demand-dependent fan control in Automatic mode and optional 0-1-2-3-4-5 stage selection
- Sequential valve control (Open/Close) and fan control via a (2-pipe) or two data points 0-10 VDC (4-pipe)
- connection option for KaController Motor fault: integrated Motor fault contact
Connection
Female NPT thread includes factory-fitted adapters to 3/4 inch R-thread
Configuration
| System | | 2-pipe |
| Water connections | | right |
| Nominal voltage | V | 230 |
| Model size | | 2 |
| Length | mm | 262 |
| Width | mm | 1036 |
| Height | mm | 650 |
| Weight | kg | 31.4 |