Fan Coils
Venkon XL
Article no.:
34821D0R217EC1
List price
2,181.00 €
plus VAT
Overview
The unit is easy to clean and the entire design is certified to VDI 6022. As standard, the Venkon XL is equipped with ePM10>50% (M5) / MERV 8 filters or ePM1>50% (F7) / MERV 13.
The generously dimensioned heat exchanger ensures the highest possible output.
The unit can either be suspended from the ceiling on threaded rods or attached to the concrete ceiling with rubber washers to decouple the sound.
The condensate tray continues as far as the heat exchanger connection area to collect any condensate produced. Fully coated, insulated and designed for ease of cleaning. Separate condensate trays are available for the valves.
Water and electricity connections are routed out of the unit at opposite ends for a simple and freely accessible connection.
- The Venkon XL fan coil is equipped with electromechanical control as standard, with optional KaControl.
- The optional modbus interface allows units with KaControl configuration to be networked into systems individually or into groups with factory-programmed higher-level Kampmann system controllers.
Optionally available separately or fitted and wired on the basic unit.
Calculate performance data
Sound power octave spectrum
The sound power is determined depending on the use according to DIN EN ISO 3741 (in the echo chamber), according to DIN EN ISO 3744 (in the low-reflective half-space) or according to DIN EN ISO 9614 (intensity method).
Oktave Spektrum
Accessories
Control accessories KaControl
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210001
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210001
List price
222.00 €
plus VAT
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9017 traffic black, made of resistant PVC, Type 3210006
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210006
List price
222.00 €
plus VAT
KaController
with side operating keys, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210002
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210002
List price
222.00 €
plus VAT
Room temperature sensor
Wall-mounted, Surface-mounted, Protection class IP 30, Colour similar to RAL 9010 pure white, made of plastic, Type 3250110
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250110
List price
58.00 €
plus VAT
Clip-on pipe sensor
to detect the medium temperature, Protection class IP 67, Temperature setting range -20 - 70 °C, Colour black, Type 3250115
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250115
List price
56.00 €
plus VAT
Serial KNX card
for integration into a KNX/EIB network, interface PCOS00KXN0, Type 3260702
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260702
List price
362.00 €
plus VAT
Serial CANbus card
to increase the number of units in a single-circuit system from 7 to a maximum of 30 units, one required per unit, Extension of the cable length from the first to the last unit from 30 m to 500 m, Can only be used with the KaControl -C1 control version!The room temperature cannot be recorded by a room sensor when using CanBus cards., Type 3260301
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003260301
List price
125.00 €
plus VAT
Serial Modbus card
Type 3260101
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260101
List price
117.00 €
plus VAT
Serial CANbus card
to extend the number of units in single-circuit control to up to 30 units, factory-installed, wired and parametrised on the basic unit
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Article no.:
34826B0B00C
List price
181.00 €
plus VAT
Serial KNX card
KaControl KNX communication card for the integration of Kampmann units into a KNX system, factory-installed, wired and parametrised on the basic unit
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Article no.:
34826B0B00X
List price
426.00 €
plus VAT
Serial Modbus card
for connection to a higher-level controller or BMS station, for the formation of multi-circuit control zones with KaControl, each with a max. of six units, 1x required per master unit, optional for slave units, 1x required for each one, or for connection to a BMS on site, factory-installed, wired and parametrised on the basic unit
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Suitable for: all units with control option KaControl -C1, Venkon XL Fan Coils
Article no.:
34826B0B00M
List price
171.00 €
plus VAT
Valve kits
2-way valve kit
2-pipe, includes return valve, factory-fitted to the basic unit
Suitable for: Model size 1, DN 20
Suitable for: Model size 1, DN 20
Article no.:
34823B0B212
List price
181.00 €
plus VAT
Differential pressure-independent valve kit
2-pipe, includes return valve, factory-fitted to the basic unit
Suitable for: Model size 1, Min. Flow volume 200 l/h, max. Flow volume 1300 l/h, DN 20
Suitable for: Model size 1, Min. Flow volume 200 l/h, max. Flow volume 1300 l/h, DN 20
Article no.:
34823B0B21D
List price
381.00 €
plus VAT
Valve actuators
Thermoelectric actuator
2-pipe, 1 St. 24 V AC/DC, Open/Closed, 50 Hz, factory-installed and wired on the basic unit
Suitable for: Venkon XL and valve kits, electromech. control (E00/E01) or KaControl (EC1)
Suitable for: Venkon XL and valve kits, electromech. control (E00/E01) or KaControl (EC1)
Article no.:
34826B0B202
List price
85.00 €
plus VAT
Perimeter Casings
calculation-relevant accessory
Casing, ceiling-mounted
calculation-relevant accessory
durable wall casing made of powder-coated galvanised sheet steel, the filter can be changed or inspected without disassembly of the casing, horizontal suspended, powder coated, Colour RAL 9016 traffic-white, pre-fitted housing
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34822D0BH100
List price
821.00 €
plus VAT
Filter
calculation-relevant accessory
Filter
calculation-relevant accessory
cassette filter as a replacement filter, ePM1 filter>50% (F7) / MERV 13, 1 set = 1 piece(s)
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34829B0B0107
List price
62.00 €
plus VAT
Filter
calculation-relevant accessory
cassette filter as a replacement filter, ePM10 filter>50% (M5) / MERV 8, 1 set = 1 piece(s)
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34829B0B0105
List price
62.00 €
plus VAT
Condensate tray/pump
Connection kit for condensation pump
to drain condensate produced on the valves and in the unit, 115 V240 V AC, 50 - 60 Hz, 8 W, factory-fitted and wired
Suitable for: all sizes
Suitable for: all sizes
Article no.:
34826B0B00K
List price
503.00 €
plus VAT
Valve condensate tray, for ceiling mounting
to collect any condensate produced on the valves, powder coated, Colour RAL 7024 graphite grey, factory-fitted to the basic unit
Suitable for: Model size 1 - 4
Suitable for: Model size 1 - 4
Article no.:
34824D0B000
List price
38.00 €
plus VAT
Accessories for recirculation air basic unit, air-side
calculation-relevant accessory
surcharge per spigot for flexible pipe connection plenum box
surcharge per spigot (size 100 mm, 125 mm, 150 mm, 180 mm or 200 mm) for the flexible pipe connection plenum box with the Venkon XL
Suitable for: all sizes
Suitable for: all sizes
Article no.:
34825B0B0005
List price
38.00 €
plus VAT
Flexible connection
with frame on both sides, including canvas for structure-borne noise decoupling and length compensation of on-site dimensional inaccuracies
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34825B0B0104
List price
90.00 €
plus VAT
Flexible pipe connection unit
calculation-relevant accessory
for the connection of round pipes to the air intake and/or air outlet of the unit. Available in various sizes.
Suitable for: Model size 1, Number of connecting pieces 2 St., DN 200
Suitable for: Model size 1, Number of connecting pieces 2 St., DN 200
Article no.:
34825B0B0105
List price
337.00 €
plus VAT
Air duct, 90° angled
calculation-relevant accessory
To change the air flow in the air duct at right angles.
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34825B0B0103
List price
282.00 €
plus VAT
Service hatch with frame
Unit for subsequent maintenance in suspended ceilings, suitable for plasterboard or concrete slab ceilings, Circumferential frame: 25 mm, Colour RAL 9016 traffic-white, supplied separately
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34825B0B0110
List price
418.00 €
plus VAT
Sound attenuator
calculation-relevant accessory
Splitter noise attenuator, Wall- or ceiling-mounted, supplied separately
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34825B0B0106
List price
362.00 €
plus VAT
Transition panel
for air intake to connect to the Venkon’s air-side accessories
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34827B0B0106
List price
67.00 €
plus VAT
transition angle
for air outlet to connect to the Venkon’s air-side accessories
Suitable for: Model size 1
Suitable for: Model size 1
Article no.:
34827B0B0107
List price
67.00 €
plus VAT
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
EPD Venkon XL size 4
PDF
(895 kB)
EPD Venkon XL size 3
PDF
(864 kB)
EPD Venkon XL size 2
PDF
(896 kB)
EPD Venkon XL size 1
PDF
(898 kB)
EU Declaration of Conformity Venkon XL fan coils (FCU)
PDF
(457 kB)
Digital EPD database for Venkon XL size 1
Cross-product information
Products
PDF
(17.9 MB)
Fan Coil brochure
PDF
(9.6 MB)
Kampmann hotel references
PDF
(6.2 MB)
Manuals
Venkon XL fan coils (FCU)
PDF
(10.5 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
Fan Coil Venkon XL, Baugroesse 1 - 4, [Inch], PDF
PDF
(324 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [mm], PDF
PDF
(327 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [Inch], DWG
DWG
(772 kB)
Fan Coil Venkon XL, Baugroesse 1 - 4, [mm], DWG
DWG
(773 kB)