basic unit

Kampmann TOP unit heater for wall- or ceiling-mounting. Housing made of sendzimir galvanised sheet steel with standard suspension lugs, complete with motor guard and louvre, single-row, additional discharge and intake components can be screwed on. LABS compliant according to VDMA 24364, category A1/B1/B2/C1/C2-L and B1/C1/C2-W. Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.2,13E+02. Further calculations possible online.

Heat exchanger

High-output heat exchanger, steel with ellipse-shaped core pipe with steel fins, galvanised, suitable for LPHW and thermal oil.

System		2-pipe
Max. operating pressure	bar	16
Max. entering water temperature	°C	120
Max. air inlet temp.	°C	40
Max. glycol volume	%	50

Fan

Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Overtemperature protection of the fan by active temperature management. Integrated motor protection.

Protection class IP

54

Control

• Built-in KaControl MC controller for continuous fan control with motor monitoring.
• For the control of 24 V DC actuators (Open/Closed) for heating and cooling operation.
• With connection option for 5 multifunctional inputs (room temperature, window contact, supply and return temperature, heating/cooling changeover, condensate alarm, sequential control via a 0-10 V signal etc.), unit-specific control and regulation algorithms with the core functions of room temperature control (heating/cooling).
• Timer program with battery-backed real-time clock for four operating modes (Day/Eco/Extra/Off), commissioning function.
• Grouping of up to 10 units and a display to create a control zone using CAN-bus, automatic addressing and communication monitoring of all bus subscribers, continuous synchronisation of all statuses and parameters within the group.
• CAN bus interface and galvanically isolated RS485 interface, each with two terminal blocks for separate connection with daisy chain cabling with a switchable terminal resistor.
• connection of central functions, such as heating cooling changeover to a freely selectable unit within the group.
• Ethernet interface with two RJ45 sockets with built-in switching function.
• KNX-TP interface with socket terminal, all terminals are designed as plugs, wireless communication via Wi-Fi web server for user-friendly operation and for complete password-protected parametrisation.
• protocols can be unlocked via licences: BACnet/IP, Modbus TCP, Modbus RTU, KNX.
• Repair switch which can be locked off using a lock on site.
• With an external connection box.
  

Configuration

Model size		5
Width	mm	640
Height	mm	600
Length	mm	320
Weight	kg	90.3
Water content	l	8.2
Connection		1''