Basic unit

Kampmann Katherm ID trench heaters, designed as ready-to-install convector-based in-floor trench heating and cooling units with induction function and supply air connection for the supply of preconditioned primary air. Induction function: conditioned primary air flows from a compressed air box via specially developed nozzles into the trench and induces secondary air through the coil. Heat outputs and cooling outputs tested in accordance with E DIN EN 16430, parts 1 to 3.
Floor tray made of sendzimir galvanised steel sheet, coated graphite grey RAL 7024 on both sides, with adjustable feet mounted inside and on the outside (room side), for load-bearing height adjustment in raised floors; with height-adjustable feet on the outside of the trench (room side) with acoustic insulation; with brackets to reinforce the floor trench, mounting profiles for induction housing, headers, cross struts and openings for waterside and electrical connection, with cover plate for the connection area.

Heat exchanger

High-performance convector made from round copper pipes with aluminium fins, coated graphite-grey. With air guide Panel. With integral bleed option.

System		2-pipe
Max. operating pressure	bar	10
Max. entering water temperature	°C	90

Supply air

With primary air connection spigot on the room side attached to the side panel of the trench including flow rectifier to reduce sound; with replaceable nozzle and the number of nozzles corresponding to the primary air volume, which have been designed for the application, with subsequent adaptation of the primary air volume possible.

Grille

With double-T profile grille. Corrosion-proof steel spring connections with matching spacers, with colour-coordinated frame profile to match the grille, with transparent dirt and dust protective cover to protect the frame edge.

Configuration

System		2-pipe
primary air volume		high
Grille design		Roll-up grille
Grille finish		Stainless steel
Supply air spigot		nominal size 100
Length	mm	1000
Width	mm	340
Height	mm	180
Bar height	mm	18
Bar depth	mm	6
Bar spacing	mm	10
Free area, approx.	%	65
Weight	kg	25.3