Basic unit
Kampmann Venkon fan coil for heating and/or cooling. Designed for rooms with high demands in terms of low noise emission and cosy room comfort. Hygiene-certified in line with VDI 6022.
Ceiling unit (also suitable for wall mounting for dry cooling and also for heating). Basic unit made of sendzimir galvanised sheet steel, insulated with a vapour diffusion and noise-reducing layer to prevent the ingress of condensation.
| Insulation thickness | mm | 3 |
| Air inlet | | ISO Coarse filter |
Optional primary air connection for the introduction of preconditioned air.
Life Cycle Assessment (LCA) data is published in the form of an EPD according to EN 15804 and is available to download from the International EPD System. Registered in the building products platform DGNB Navigator. GWP (phase A1-A3), kg CO2 Äq.3.07E+02. Further calculations possible online.
Heat exchanger
High-output heat exchanger made of round copper pipes with aluminium fins, including anti-twist mechanism. Integrated air vent option.
| System | | 4-pipe |
| Max. operating pressure | bar | 10 |
| Max. entering water temperature | °C | 90 |
| Min. entering water temperature | °C | 4 |
| Max. air inlet temp. | °C | 40 |
| Max. glycol volume | % | 50 |
Condensate tray
Powder-coated galvanised sheet steel condensate tray. Condensate tray designed as an independent component that can be removed for cleaning and maintenance in accordance with VDI 6022.
Fan
Energy-saving EC fan with 0-10 V input for continuously variable speed control. All rotating parts have low-noise and maintenance-free bearings. Factory-wired. Insulation class F
Control
KaControl system
factory-fitted and wired ready for connection, consisting of:
- Mains adapter board:
- 230 VAC terminals with fuse
- power supply 24 V DC
- terminals for continuously variable EC fan and optional condensate pump
- KaControl PCB:
- Single room control of max. 6 units
- Slot for optional communication cards for integration into KNX TP or Modbus RTU automation networks
- CANbus card for extension up to 30 units
- Modbus card for BMS connection or KaControl system solution
- LON card for BMS connection
- KNX for BMS connection
- Two parametrisable and invertible digital inputs for Unit On/Off, Comfort/Economy, Heating/Cooling (changeover), condensate alarm
- Three multifunction inputs, e.g. for room temperature or air intake sensors.
- One digital output 24 VDC/max. 2A for heating/cooling fan mode (2-pipe) or cooling (4-pipe)
- One digital parametrisable output 24 VDC/max. 2A for heating fan mode (4-pipe), cooling requirement, heat requirement or unit fault message
- Functions:
- room frost protection function
- Frost protection function tab (clip-on sensor needed)
Control version with 1.5 m cable, designed as external control box.
Configuration
| System | | 4-pipe |
| Air inlet | | bottom |
| Model size | | 67 |
| Length | mm | 1725 |
| Width | mm | 494 |
| Height | mm | 223 |
| Weight | kg | 46.3 |
| Water connections | | right |
| Connection Cooling | | 3/4'' |
| Connection Heating | | 1/2 inch |