Unit Heaters
TOP
Article no.:
153000443056M1
List price
2,118.00 €
plus VAT
Overview
- KaControl MC control system for operation via separate touch panel TP 2"
- Room group control of up to ten units via factory-fitted CAN-bus (up to 100 m)
- Demand-led automatic or optional manual fan control
- Freely configurable multifunctional inputs that can be used, for example, to detect temperatures, window contacts, presence detectors, card readers etc.
- Integrated Webserver (Wi-Fi or LAN) for ease of commissioning, parametrisation, trend data analysis etc. on a laptop or mobile device
This type of heat exchanger is characterised by its low weight and high heat outputs.
- Suitable for LPHW 120 °C and 16 bar continuous operating pressure.
- Aluminium slats permanently connected by pipe expansion.
- Steel header and manifold.
Copper-aluminium heat exchangers are not suitable for use with steam and thermal oil systems.
Steel heat exchangers are recommended if throughout cleaning is required.
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- Highly efficient due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- Optional 2-stage wide-blade fan with explosion-proof AC external rotor motor (IP 44)
- Copper-aluminium heat exchanger (see Fig.), extremely lightweight, with high heat outputs and low dimensions, suitable for low temperature heating systems and LPHW heating systems, steel header and manifold
- Steel heat exchanger, galvanised, robust and durable
- Steel heat exchanger, galvanised steel, cross-counterflow, particularly suitable for high water temperature spreads
- Steel heat exchanger, galvanised, for steam
Ultra-efficient as a component in a hybrid system: while the TOP has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
It is operated for example using a thermostat, KaControl Touch Panel or by linking it into the building automation via Modbus, KNX, or BACnet.
However you plan to heat, TOP unit heaters do the job with the suitable heat exchanger. Copper/aluminium or galvanised steel for PWW/PHW (for low temperature operation as well), cross-counterflow heat exchanger with large temperature spreads, and on request, with a special version for steam.
Accessories
Control accessories KaControl MC
Touch Panel TP 2
Touch display with clear visualisations, black screen border and white case, 24 V, Room control unit for installation in a flush-mounted box with a freely selectable 55x55 mm frame, Protection class IP 20, made of Glass and PVC
Suitable for: All units with control configuration KaControl MC1 and MC2
Suitable for: All units with control configuration KaControl MC1 and MC2
Article no.:
196003311101
List price
259.00 €
plus VAT
Touch Panel TP 2 Industrie
KaControl MC TP 2 surface-mounted touch panel, 24 V, 24 V Room control unit, mounted in a wall-mounted housing IP 65 with transparent cover, 0.75 W, Surface-mounted, Protection class IP 65, Colour RAL 7035 grey, made of ABS, polycarbonate, Type 3314101
Suitable for: All units with control configuration KaControl MC1 and MC2
Suitable for: All units with control configuration KaControl MC1 and MC2
Article no.:
196003314101
List price
635.00 €
plus VAT
Modbus TCP licence ex-works
Licence for activation of the Modbus TCP interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361103
List price
130.00 €
plus VAT
Modbus RTU licence ex-works
Licence for activation of the Modbus RTU interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361102
List price
94.00 €
plus VAT
BACnet/IP licence ex-works
Licence for activation of the BACnet/IP interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361104
List price
444.00 €
plus VAT
KNX licence ex-works
Licence for activation of the KNX interface ex-works, Hardware for use of the interface is installed and activated
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003361101
List price
302.00 €
plus VAT
adapter cable
24 V, for the connection of existing 2-point valve actuators, Internal, Protection class IP 20, Cable length 500 mm, Type 3305225
Suitable for: All units with control configuration KaControl MC1
Suitable for: All units with control configuration KaControl MC1
Article no.:
196003305225
List price
38.00 €
plus VAT
Surface-mounted housing
Complete with cover frame, Surface-mounted, Colour RAL 9010 gloss pure white, made of Thermoplastic, Type 3304111
Suitable for: Touch Panel TP 2
Suitable for: Touch Panel TP 2
Article no.:
196003304111
List price
61.00 €
plus VAT
Surface-mounted housing
Complete with cover frame, Surface-mounted, Colour RAL 9005 matt satin deep black, made of Thermoplastic, Type 3304112
Suitable for: Touch Panel TP 2
Suitable for: Touch Panel TP 2
Article no.:
196003304112
List price
82.00 €
plus VAT
room temperature sensor
to detect the room temperature., Surface-mounted, Protection class IP 20, Colour RAL 9010 pure white, made of Polycarbonat, Type 3321111
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003321111
List price
60.00 €
plus VAT
room temperature sensor
to detect the room temperature., Surface-mounted, Protection class IP 65, Colour RAL 9010 pure white, made of Polycarbonat, Type 3321121
Suitable for: all units with control option KaControl MC
Suitable for: all units with control option KaControl MC
Article no.:
196003321121
List price
60.00 €
plus VAT
Switching and control units – Mixed air / fresh air, electro-mechanical
Servomotor
can be reversed, 230 V Open/Closed, Protection class IP 54, Type 30262
Suitable for: KaMAX
Suitable for: KaMAX
Article no.:
196000030262
List price
294.00 €
plus VAT
Valve kits
Unit heater shut-off set, angled version
Connection 1'', Type 34976
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034976
List price
254.00 €
plus VAT
Unit heater shut-off set, straight version
Connection 1'', Type 34977
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034977
List price
221.00 €
plus VAT
Valve actuators, supplied loose
valve actuator
Drive T, 24 V AC/DC, 2-point, normally closed, 3m connecting line-MB2, PVC, VA10N, 1 W, Protection class III, Protection class IP 54 Cable length 0.12 m, supplied separately, made of Polyamide
Suitable for: All units with control configuration KaControl MC1 in conjunction with 2-way valve or differential pressure-independent valve
Suitable for: All units with control configuration KaControl MC1 in conjunction with 2-way valve or differential pressure-independent valve
Article no.:
196TS3P240500AB
List price
68.00 €
plus VAT
Valves
2-way valve kit
as a straight valve body, Connection 1'', kvs value 3.3 m³/h, Type 31911
Suitable for: all unit heaters
Suitable for: all unit heaters
Article no.:
153000031911
List price
101.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, Connection 1'', kvs value 3.1 m³/h, Type 31950
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Min. Flow volume 250 l/h, max. Flow volume 1800 l/h, DN 20
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Min. Flow volume 250 l/h, max. Flow volume 1800 l/h, DN 20
Article no.:
153000031950
List price
195.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, Connection 1'', kvs value 4.1 m³/h, Type 31951
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Min. Flow volume 400 l/h, max. Flow volume 2500 l/h, DN 25
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Min. Flow volume 400 l/h, max. Flow volume 2500 l/h, DN 25
Article no.:
153000031951
List price
302.00 €
plus VAT
Air outlets
calculation-relevant accessory
KaMAX
calculation-relevant accessory
Multi Air MiX for ceiling-mounted units, manual level adjustment
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034111
List price
690.00 €
plus VAT
KaMAX Open-Stop-Close switch
for electrically actuated continuously variable manual adjustment of the KaMAX louvre
Article no.:
196000030115
List price
107.00 €
plus VAT
Louvre
two-row for wall- and ceiling-mounted units
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034002
List price
154.00 €
plus VAT
Induction air outlet louvre
calculation-relevant accessory
mainly used for wall-mounted units, for ceiling-mounted units with ceiling heights of more than 4.0 m
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034101
List price
141.00 €
plus VAT
Diffuser
calculation-relevant accessory
in four directions, for ceiling-mounted units
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034004
List price
244.00 €
plus VAT
Outlet nozzle
calculation-relevant accessory
for ceiling-mounted units, especially for high-ceilinged buildings, sendzimir galvanised
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034006
List price
141.00 €
plus VAT
Wide nozzle
calculation-relevant accessory
recirculating air only, suitable for industrial door air curtains
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034007
List price
220.00 €
plus VAT
Brackets
Universal 2-point brackets
recirculating air only, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030041
List price
105.00 €
plus VAT
Universal 4-point brackets
recirculating air only, made of sendzimir galvanised sheet steel, as a 4-point fixing for ceiling installation, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030042
List price
96.00 €
plus VAT
Universal 2-point T-support brackets
recirculating air only, Ceiling-mounted
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030047
List price
275.00 €
plus VAT
Wall brackets
recirculating air only, made of sendzimir galvanised sheet steel for wall mounting, a complete set
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 4
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 4
Article no.:
198000034044
List price
113.00 €
plus VAT
Ceiling-wall brackets
for ceiling or wall mounting, consisting of 2 multi-edged brackets with slotted holes and screws
price for 1 complete set
Suitable for: Model size 4
price for 1 complete set
Suitable for: Model size 4
Article no.:
198000034049
List price
140.00 €
plus VAT
Galvanised steel components
calculation-relevant accessory
Flexible connection
square
Suitable for: Model size 4, Length 120 - 160 mm
Suitable for: Model size 4, Length 120 - 160 mm
Article no.:
198000034013
List price
137.00 €
plus VAT
Filter box
calculation-relevant accessory
sendzimir galvanised, ISO Coarse 90% (G4) filter
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034010
List price
535.00 €
plus VAT
90-degree air duct
calculation-relevant accessory
Suitable for: Model size 4
Article no.:
198000034021
List price
352.00 €
plus VAT
Air duct
calculation-relevant accessory
square, fixed frame on both sides
Suitable for: Model size 4
Suitable for: Model size 4
Article no.:
198000034015
List price
191.00 €
plus VAT
Air duct T-section
Suitable for: Model size 4
Article no.:
198000034022
List price
377.00 €
plus VAT
Downloads
Declarations/Certificates
Certificate ISO 9001, 14001, 50001
PDF
(116 kB)
EU Declaration of Conformity for unit heaters
PDF
(369 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Manuals
KaControl MC - Multi Connect Climate Control Quick Start Guide
PDF
(1.3 MB)
TOP unit heaters
PDF
(8.8 MB)
TOP unit heaters, brief instructions
PDF
(4.1 MB)
General product information
Brochure Unit Heaters
PDF
(3.2 MB)
Technical catalogues
KaControl MC - Multi Connect
PDF
(2.2 MB)
TOP unit heaters
PDF
(18.2 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
CAD-Drawings
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
PDF
(294 kB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
PDF
(342 kB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DWG
(1.4 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DWG
(2.2 MB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DXF
(10.8 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DXF
(17.1 MB)
Installation plans
TOP / TOP C, KaControl MC version
PDF
(1 MB)