Unit Heaters
TOP
Article no.:
153000484068C1
List price
6,947.00 €
plus VAT
Overview
This type of heat exchanger is characterised by its low weight and high heat outputs.
- Suitable for LPHW 120 °C and 16 bar continuous operating pressure.
- Aluminium slats permanently connected by pipe expansion.
- Steel header and manifold.
Copper-aluminium heat exchangers are not suitable for use with steam and thermal oil systems.
Steel heat exchangers are recommended if throughout cleaning is required.
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- Highly efficient due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- Optional 2-stage wide-blade fan with explosion-proof AC external rotor motor (IP 44)
- Copper-aluminium heat exchanger (see Fig.), extremely lightweight, with high heat outputs and low dimensions, suitable for low temperature heating systems and LPHW heating systems, steel header and manifold
- Steel heat exchanger, galvanised, robust and durable
- Steel heat exchanger, galvanised steel, cross-counterflow, particularly suitable for high water temperature spreads
- Steel heat exchanger, galvanised, for steam
Ultra-efficient as a component in a hybrid system: while the TOP has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
It is operated for example using a thermostat and KaControl control panel or by linking it into the building automation via Modbus, KNX, or BACnet.
However you plan to heat, TOP unit heaters do the job with the suitable heat exchanger. Copper/aluminium or galvanised steel for PWW/PHW (for low temperature operation as well), cross-counterflow heat exchanger with large temperature spreads, and on request, with a special version for steam.
Accessories
Control accessories KaControl
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210001
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210001
List price
222.00 €
plus VAT
KaController
with one-button operation, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9017 traffic black, made of resistant PVC, Type 3210006
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210006
List price
222.00 €
plus VAT
KaController
with side operating keys, 24 V wall-mounted room control unit, with integral room temperature sensor, Protection class IP 30, Temperature setting range 8 - 35 °C, Colour similar to RAL 9010 pure white, made of resistant PVC, Type 3210002
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003210002
List price
222.00 €
plus VAT
Industry KaController
industrial housing with hinged transparent cover, lockable, with side operating keys, Surface-mounted, Protection class IP 65, Colour grey, made of plastic, Type 3214002
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Article no.:
196003214002
List price
800.00 €
plus VAT
Room temperature sensor
Wall-mounted, Surface-mounted, Protection class IP 30, Colour similar to RAL 9010 pure white, made of plastic, Type 3250110
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is the KaController installation site suitable for a temperature measurement? - If it is not suitable, e.g. behind a curtain, then a KaControl room temperature sensor should be chosen for each group!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250110
List price
58.00 €
plus VAT
Outside temperature sensor/industrial temperature sensor
Surface-mounted, Protection class IP 65, Colour similar to RAL 9010 pure white, Type 3250112
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Suitable for: all units with control option KaControl -C1, ProtecTor Door Air Curtains
Article no.:
196003250112
List price
58.00 €
plus VAT
Clip-on pipe sensor
to detect the medium temperature, Protection class IP 67, Temperature setting range -20 - 70 °C, Colour black, Type 3250115
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Is there a risk of frost, e.g. due to the ingress of cold air – if so, then a KaControl clip-on pipe sensor should be chosen for each unit!
heating/cooling changeover function only in conjunction with 3-way valve!
Suitable for: all units with KaControl -C1 and climate controller art. no. 19600014894*
Article no.:
196003250115
List price
56.00 €
plus VAT
Serial KNX card
for integration into a KNX/EIB network, interface PCOS00KXN0, Type 3260702
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260702
List price
362.00 €
plus VAT
Serial CANbus card
to increase the number of units in a single-circuit system from 7 to a maximum of 30 units, one required per unit, Extension of the cable length from the first to the last unit from 30 m to 500 m, Can only be used with the KaControl -C1 control version!The room temperature cannot be recorded by a room sensor when using CanBus cards., Type 3260301
Suitable for: all units with control option KaControl -C1
Suitable for: all units with control option KaControl -C1
Article no.:
196003260301
List price
125.00 €
plus VAT
Serial Modbus card
Type 3260101
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Required for each device for connection to KaControl panels or on-site Modbus networks.
The communication card slots into the free interface on the PCB.
Suitable for: all units with control option KaControl -C1
Article no.:
196003260101
List price
117.00 €
plus VAT
Switching and control units – Mixed air / fresh air, electro-mechanical
Servomotor
can be reversed, Open/Closed, Protection class IP 54, Type 30262
Suitable for: KaMAX
Suitable for: KaMAX
Article no.:
196000030262
List price
282.00 €
plus VAT
Valves
Thermoelectric shut-off valve
as a straight valve body with thermoelectric actuator 24 V AC/DC, 24 V AC/DC, Connection 1 1/2'' kvs value 10 m³/h, Max. operating pressure 13 bar, Type 30933
Only in conjunction with a KaControl controller!
Only in conjunction with a KaControl controller!
Article no.:
196000030933
List price
325.00 €
plus VAT
Control shut-off valve
with reducer 1 1/4 inch x 1 1/2 inch m/f, 24 V AC/DC, for automatic flow and temperature control, kvs value 8.4 m³/h, Max. operating pressure 25 bar, Type 30982
Suitable for: Model size 6 - 8, TOP Unit Heaters, min. flow volume 600 l/h, max. flow volume 4800 l/h, DN 32
Suitable for: Model size 6 - 8, TOP Unit Heaters, min. flow volume 600 l/h, max. flow volume 4800 l/h, DN 32
Article no.:
196000030982
List price
488.00 €
plus VAT
Unit heater shut-off set, angled version
Connection 1 1/2'' Max. operating pressure 10 bar, Type 38976
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038976
List price
446.00 €
plus VAT
Unit heater shut-off set, straight version
Connection 1 1/2'' Max. operating pressure 10 bar, Type 38977
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038977
List price
428.00 €
plus VAT
Air outlets
calculation-relevant accessory
KaMAX
calculation-relevant accessory
Multi Air MiX for ceiling-mounted units, manual level adjustment
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038111
List price
1,055.00 €
plus VAT
KaMAX Open-Stop-Close switch
for electrically actuated continuously variable manual adjustment of the KaMAX louvre
Article no.:
196000030115
List price
103.00 €
plus VAT
Outlet nozzle
calculation-relevant accessory
for ceiling-mounted units, especially for high-ceilinged buildings, sendzimir galvanised
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038006
List price
234.00 €
plus VAT
Brackets
Universal 2-point brackets
recirculating air only, 1 complete set
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038041
List price
172.00 €
plus VAT
Universal 4-point brackets
recirculating air only, made of sendzimir galvanised sheet steel, as a 4-point fixing for ceiling installation, 1 complete set
Suitable for: Model size 8
Suitable for: Model size 8
Article no.:
198000038042
List price
162.00 €
plus VAT
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
EU Declaration of Conformity for unit heaters
PDF
(369 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Manuals
TOP unit heaters
PDF
(7.7 MB)
TOP unit heaters, brief instructions
PDF
(4.1 MB)
Technical catalogues
TOP unit heaters
PDF
(18.2 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
Cross-product information
Brochure Unit Heaters
PDF
(2.3 MB)
CAD-Drawings
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [Inch]
PDF
(228 kB)
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [mm]
PDF
(269 kB)
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [mm]
DXF
(15.9 MB)
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [Inch]
DXF
(9.8 MB)
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [mm]
DWG
(2.1 MB)
TOP unit heaters, model size 8, heat exchanger model copper/aluminium and galvanised steel [Inch]
DWG
(1.3 MB)
Installation plans
TOP, KaControl version
PDF
(775 kB)