Unit Heaters
TOP
Article no.:
153000452058
List price
2,165.00 €
plus VAT
Overview
This type of heat exchanger is characterised by its low weight and high heat outputs.
- Suitable for LPHW 120 °C and 16 bar continuous operating pressure.
- Aluminium slats permanently connected by pipe expansion.
- Steel header and manifold.
Copper-aluminium heat exchangers are not suitable for use with steam and thermal oil systems.
Steel heat exchangers are recommended if throughout cleaning is required.
- Continuously variable EC single-phase whisper-quiet sickle-blade fan (see Fig.)
- High-efficiency due to the aerodynamic design of the rotor housing
- Motor protection class IP 54
- According to DIN ISO 21940-11 for the corresponding fan category; the external rotor motor integrated in the fan impeller is balanced according to ISO 14694
- Complies with Directive (EU) 327/2011 ("LOT 11")
- Optional 2-stage wide-blade fan with explosion-proof AC external rotor motor (IP 44)
- Copper-aluminium heat exchanger (see Fig.), extremely lightweight, with high heat outputs and low dimensions, suitable for low temperature heating systems and LPHW heating systems, steel header and manifold
- Steel heat exchanger, galvanised, robust and durable
- Steel heat exchanger, galvanised steel, cross-counterflow, particularly suitable for high water temperature spreads
- Steel heat exchanger, galvanised, for steam
Ultra-efficient as a component in a hybrid system: while the TOP has decentralised temperature control, an air handling unit with small dimensions deals with ventilation and heat recovery. This saves operating costs as all components only work when demand is detected. And you benefit from the reduced size of the air handling unit in terms of investment and installation.
It is operated for example using a thermostat and KaControl control panel or by linking it into the building automation via Modbus, KNX, or BACnet.
However you plan to heat, TOP unit heaters do the job with the suitable heat exchanger. Copper/aluminium or galvanised steel for PWW/PHW (for low temperature operation as well), cross-counterflow heat exchanger with large temperature spreads, and on request, with a special version for steam.
Accessories
Control accessories electromechanical 230 V
Room thermostat
Heating/Cooling, 2- and 4-pipe, 3-stage. Only in conjunction with valves/valve kits with actuator, with OFF/Manual/Automatic fan switchover, 230 V AC, Open/Closed, Surface-mounted, Protection class II, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour similar to RAL 9010 pure white, Type 30155
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 Katherm HK Trench Technology, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon or PowerKon LT Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 Katherm HK Trench Technology, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon or PowerKon LT Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
Article no.:
196000030155
List price
249.00 €
plus VAT
Clock thermostat
Heating/Cooling, 2- and 4-pipe, continuously variable, with LCD operating menu and integrated timer program, 230 V AC, 1 W, flush-mounted, Protection class II, Protection class IP 30, Colour similar to RAL 9010 pure white, Type 30256
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
optional connectible, remote sensor art. no. 196000148921
can optionally be connected, clip-on sensor art. no. 196000148922
Suitable for: EC units electromechanical, 5 TOP, Ultra or Ultra Allround Unit Heaters, 5 Venkon Fan Coils, 5 KaCool D AF, KaCool W or KaDeck Fan Coils
Article no.:
196000030256
List price
395.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100% presettable, On/Off via room thermostat, surface-mounted protection class IP 54, flush-mounted protection class IP 44, 230 V AC, 0-100%, Surface-mounted, Protection class IP 54, Colour similar to RAL 9010 pure white, made of plastic, Type 30510
Suitable for: EC units electromechanical, 2 ProtecTor Door Air Curtains, 5 UniLine or Tandem Door Air Curtains, 10 TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W AC Fan Coils
Suitable for: EC units electromechanical, 2 ProtecTor Door Air Curtains, 5 UniLine or Tandem Door Air Curtains, 10 TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W AC Fan Coils
Article no.:
196000030510
List price
206.00 €
plus VAT
Electronic speed controller
microprocessor-controlled control with integrated digital timer, with day, night, week programme, continuously variable fan operation 0 to 100 %, manual or automatic, 0-10 VDC, recirculation air, 230 V AC, Protection class I, Protection class IP 40, including sensor IP 66, Type 30515
Suitable for: EC units electromechanical, 10 TIP, TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W Fan Coils
Suitable for: EC units electromechanical, 10 TIP, TOP or Ultra Unit Heaters, 10 Venkon Fan Coils, 2 KaCool D AF or KaCool W Fan Coils
Article no.:
196000030515
List price
601.00 €
plus VAT
Switching and control units – Mixed air / fresh air, electro-mechanical
Servomotor
can be reversed, Open/Closed, Protection class IP 54, Type 30262
Suitable for: KaMAX
Suitable for: KaMAX
Article no.:
196000030262
List price
268.00 €
plus VAT
Thermostats
Room thermostat
with thermal feedback, 230 V AC, Surface-mounted, Protection class IP 30, Temperature setting range 5 - 30 °C, Colour similar to RAL 9010 pure white, Type 30055
Suitable for: Unit Heaters
Suitable for: Unit Heaters
Article no.:
196000030055
List price
62.00 €
plus VAT
Industrial thermostat
with setpoint adjustment by tool, with setpoint adjustment by tool, Protection class I, Protection class IP 54, Temperature setting range 5 - 30 °C, Type 30058
Suitable for: Unit Heaters, ProtecTor Door Air Curtains
Suitable for: Unit Heaters, ProtecTor Door Air Curtains
Article no.:
196000030058
List price
154.00 €
plus VAT
Industrial thermostat
with setpoint adjustment using a dial, with setpoint adjustment using a dial, Protection class I, Protection class IP 54, Temperature setting range 40 °C, Type 30059
Suitable for: Unit Heaters, ProtecTor Door Air Curtains
Suitable for: Unit Heaters, ProtecTor Door Air Curtains
Article no.:
196000030059
List price
154.00 €
plus VAT
Clock thermostat
with integral digital timer, with day/night/week programme, with night setback, Protection class IP 20, Temperature setting range 5 - 40 °C, Colour similar to RAL 9010 pure white, Type 30056
Suitable for: Unit Heaters
Suitable for: Unit Heaters
Article no.:
196000030056
List price
491.00 €
plus VAT
Valves
Thermoelectric shut-off valve
as a straight valve body with thermoelectric actuator 230 V / 50 Hz, 230 V AC, Connection 1'', kvs value 3.3 m³/h, Max. operating pressure 10 bar, Type 30911
Suitable for: all unit heaters
Suitable for: all unit heaters
Article no.:
196000030911
List price
154.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, 230 V AC, Connection 1'', kvs value 3.1 m³/h, Max. operating pressure 25 bar, Type 30950
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 250 - 1800 l/h, DN 20
Suitable for: Model size 4 - 5, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 250 - 1800 l/h, DN 20
Article no.:
196000030950
List price
239.00 €
plus VAT
Control shut-off valve
for automatic flow and temperature control, 230 V AC, Connection 1'', kvs value 4.1 m³/h, Max. operating pressure 25 bar, Type 30951
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 400 - 2500 l/h, DN 25
Suitable for: Model size 4 - 6, TOP or Ultra Unit Heaters, Flow volume Cooling (min./max.) 400 - 2500 l/h, DN 25
Article no.:
196000030951
List price
337.00 €
plus VAT
Unit heater shut-off set, angled version
Connection 1'', Max. operating pressure 10 bar, Type 35976
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035976
List price
232.00 €
plus VAT
Unit heater shut-off set, straight version
Connection 1'', Max. operating pressure 10 bar, Type 35977
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035977
List price
201.00 €
plus VAT
Repair switch
Repair switch
Enables individual units in a switching group to be decommissioned by voltage disconnection. The thermal contacts are bridged in advance, and subsequently opened on the motor side so that the other units in the group can continue to operate without interruption., EC, Protection class IP 65, 25 A, supplied separately, Type 30160
Suitable for: all unit heaters, air curtains with EC-motors
Suitable for: all unit heaters, air curtains with EC-motors
Article no.:
196000030160
List price
98.00 €
plus VAT
Air outlets
calculation-relevant accessory
KaMAX
calculation-relevant accessory
Multi Air MiX for ceiling-mounted units, manual level adjustment
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035111
List price
709.00 €
plus VAT
KaMAX Open-Stop-Close switch
for electrically actuated continuously variable manual adjustment of the KaMAX louvre
Article no.:
196000030115
List price
98.00 €
plus VAT
Louvre
two-row for wall- and ceiling-mounted units
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035002
List price
178.00 €
plus VAT
Induction air outlet louvre
calculation-relevant accessory
mainly used for wall-mounted units, for ceiling-mounted units with ceiling heights of more than 4.0 m
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035101
List price
162.00 €
plus VAT
Diffuser
calculation-relevant accessory
in four directions, for ceiling-mounted units
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035004
List price
248.00 €
plus VAT
Outlet nozzle
calculation-relevant accessory
for ceiling-mounted units, especially for high-ceilinged buildings, sendzimir galvanised
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035006
List price
149.00 €
plus VAT
Wide nozzle
calculation-relevant accessory
recirculating air only, suitable for industrial door air curtains
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035007
List price
241.00 €
plus VAT
Brackets
Universal 2-point brackets
recirculating air only, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030041
List price
96.00 €
plus VAT
Universal 4-point brackets
recirculating air only, made of sendzimir galvanised sheet steel, as a 4-point fixing for ceiling installation, 1 complete set
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030042
List price
87.00 €
plus VAT
Universal 2-point T-support brackets
recirculating air only, Ceiling-mounted
Suitable for: Model size 4 - 7
Suitable for: Model size 4 - 7
Article no.:
198000030047
List price
251.00 €
plus VAT
Wall brackets
recirculating air only, made of sendzimir galvanised sheet steel for wall mounting, a complete set
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 5
TIP and TOP unit heaters can be installed standing and also suspended.
price for 1 complete set
Suitable for: Model size 5
Article no.:
198000035044
List price
103.00 €
plus VAT
Ceiling-wall brackets
for ceiling or wall mounting, consisting of 2 multi-edged brackets with slotted holes and screws
price for 1 complete set
Suitable for: Model size 5
price for 1 complete set
Suitable for: Model size 5
Article no.:
198000035049
List price
138.00 €
plus VAT
Galvanised steel components
calculation-relevant accessory
Flexible connection
square
Suitable for: Model size 5, Length 120 - 160 mm
Suitable for: Model size 5, Length 120 - 160 mm
Article no.:
198000035013
List price
146.00 €
plus VAT
Filter box
calculation-relevant accessory
ISO Coarse 90% (G4) filter, sendzimir galvanised
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035010
List price
546.00 €
plus VAT
90-degree air duct
calculation-relevant accessory
Suitable for: Model size 5
Article no.:
198000035021
List price
357.00 €
plus VAT
Air duct
calculation-relevant accessory
square, fixed frame on both sides
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035015
List price
212.00 €
plus VAT
Air duct T-section
Suitable for: Model size 5
Article no.:
198000035022
List price
406.00 €
plus VAT
Ceiling fan
Ceiling fan
free-hanging axial fan, 3-blade,to increase air recirculation and prevent accumulation of hot airfrom the ceiling area, 230 V 50 Hz, robust solid metal design, oscillating suspension, 60 W, Protection class IP 20, 0.35 A, Colour white
Further ceiling fans as supply air fans, see also under Product Selection: TOP without heat exchanger
Suitable for: TOP or TOP C Unit Heaters
Further ceiling fans as supply air fans, see also under Product Selection: TOP without heat exchanger
Suitable for: TOP or TOP C Unit Heaters
Article no.:
153001531421
List price
329.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 1.5 A
Suitable for: Ceiling fan, 1 - 4 units
Suitable for: Ceiling fan, 1 - 4 units
Article no.:
196001530926
List price
212.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 3 A
Suitable for: Ceiling fan, 3 - 8 units
Suitable for: Ceiling fan, 3 - 8 units
Article no.:
196001530927
List price
244.00 €
plus VAT
Speed controller
continuously variable fan operation, 0-100%, 230 V Surface-mounted, Protection class IP 54, 5 A
Suitable for: Ceiling fan, 4 - 12 units
Suitable for: Ceiling fan, 4 - 12 units
Article no.:
196001530928
List price
288.00 €
plus VAT
Warm air recirculation controller
including display and two separate temperature sensors, 230 V 50 Hz, Surface-mounted, Protection class II, Protection class IP 54, 4 A
Suitable for: Ceiling fan, 10 Units
Suitable for: Ceiling fan, 10 Units
Article no.:
196001530930
List price
788.00 €
plus VAT
Services
Surcharge for powder-coating
Unit heater housing, powder coated Colour RAL 9016 traffic-white or RAL 7035 grey
Suitable for: Model size 5
Suitable for: Model size 5
Article no.:
198000035040
List price
165.00 €
plus VAT
Downloads
Declarations/Certificates
Certificate ISO 50001:2018
PDF
(194 kB)
Certificate ISO 9001:2008
PDF
(118 kB)
ErP Data Sheet for TOP unit heaters
PDF
(234 kB)
Manuals
TOP unit heaters
PDF
(7.7 MB)
TOP unit heaters, brief instructions
PDF
(4.1 MB)
BIM data (Building Information Modeling)
Kampmann Group BIM data
Cross-product information
Brochure Unit Heaters
PDF
(2.3 MB)
Technical catalogues
TOP unit heaters
PDF
(18.2 MB)
CAD-Drawings
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
PDF
(294 kB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
PDF
(342 kB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DWG
(1.4 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DWG
(2.2 MB)
TOP unit heater, model 4 - 7, copper/aluminium heat exchanger [inch]
DXF
(10.8 MB)
TOP unit heater, size 4 - 7, copper/aluminium heat exchanger [mm]
DXF
(17.1 MB)
Installation plans
TOP, electromechanical control version
PDF
(1.2 MB)